Table Gum
Table Gum
Brand Name:- GRIP X
Pkg. Available:- 1 kg, 5 kg, 20 kg, 50 kg, 55 kg
Description:
Table Gum is a adhesive specifically formulated for use as a table gum in garment printing applications. Table gums are applied to printing tables to temporarily adhere fabrics during the printing process, ensuring precision and stability.
Key Properties:
1 The primary function of these table gums is to provide temporary adhesion, allowing for precise and accurate printing.
2 They are formulated to allow for easy removal of the fabric after the printing process is complete.
Applications:
1 “Table gum” refers to adhesives used in textile printing, particularly for holding fabric in place on printing tables.
2 These products are designed to provide the necessary tackiness to secure fabric during the printing process.
3 Pidilite offers a variety of textile chemicals, including those used as table gums.
Usage Instructions:
1 Application Method: Apply an even layer of Pidivyl TGPF onto the printing table surface before positioning the fabric.
2 Drying Time: Allow the table gum to dry to a tacky state before placing the fabric to ensure optimal adhesion.
3 Cleaning: After printing, the table surface can be cleaned with water to remove any residual gum, preparing it for the next use.
Caution:
1. Avoid direct contact with skin and eyes, as it may cause irritation.
2. Do not ingest or inhale the fumes; use in a well-ventilated area.
3. Keep away from open flames, heat sources, and direct sunlight.
4. Store in a cool, dry place, away from children and pets.
5. Dispose of waste material responsibly as per local regulations.
Precaution:
1. Wear protective gloves, safety goggles, and a mask while handling.
2. In case of skin contact, wash immediately with soap and water.
3. f eye contact occurs, rinse thoroughly with clean water and seek medical advice.
4. Use in a well-ventilated area or with an exhaust system to avoid inhalation.
5. Ensure proper storage in sealed containers to prevent contamination and drying out.